Linear

We carry Linear garage door remote openers and transmitters that are suitable for residential garage door and gate use. All remotes and receivers are available for local pickup or shipped for an additional cost. Give us a call at 619-561-9370 for a free estimate.

DT-2A

  • Two-button, two-channel visor remote
  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Includes visor mounting clip
  • Power: 9-volt battery
  • Codes: 256 possible (set by dip switches)
  • RF frequency: 310 MHz
  • Dimensions: 2.16" W x 3.75" H x .95" D

DT3+1

  • Four-button visor remote
  • Hand-held four-channel transmitter with a three-channel section plus an individual one-channel section.
  • Activates one DRG gate receiver and up to three separate Delta-3 receivers
  • Test/operate LED
  • Includes visor mounting clip
  • Power: 9-volt battery
  • Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
  • RF frequency: 310 MHz
  • Dimensions: 2.16" W x 3.75" H x .95" D

Delta Mini-T

  • One-channel mini keychain transmitter
  • Test/operate LED
  • Activates one Delta-3 receiver
  • Includes key ring
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 possible (set by dip switches)
  • Dimensions: 2.2 x 1.42 x .66 inches
  • Case: black
  • Button: white

GRD

  • One-channel gate receiver
  • Designed for use with automatic gate operators or systems where a remote antenna is needed
  • Uses the Delta-3 radio format
  • Auto voltage sensing
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Includes whip antenna, three feet of coaxial cable, and bulkhead connector
  • Power: 12-30 VAC or 10.5-30 VDC
  • Codes: 256 possible (set by dip switches)
  • RF frequency: 310 MHz
  • Dimensions: 3.625" W x 5.25" H x 1.5" D

Multicode 109950 Receiver

  • One-channel gate receiver
  • Designed for use in gate operator applications
  • Includes an 11-inch wire whip antenna for local reception
  • The whip antenna connects to the receiver's Type-F antenna connector
  • Compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters
  • The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals
  • Programmed with a 10-position coding switch
  • Operates on 12-24 volts AC or DC power
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1,024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)- dual frequency
  • Dimensions: 3.625" W x 5.25" H x 1.5" D

Multicode 308913

  • One-channel visor transmitter
  • DIP switch
  • Portable transmitter designed for automatic door and gate operator applications
  • Red test/operate indicator
  • A visor clip is included
  • Multi-Code format with one 10-position coding switch
  • 1,024 possible codes
  • The transmitter will only activate receivers set with the same code
  • Compatible with 310 MHz Stanley receivers and Model 109950, 302850, and 309013 receivers.
  • Power: 9-volt battery
  • RF Frequency: 300 MHz

Multicode 412001

Two-channel visor transmitter

  • Portable transmitter designed for automatic door and gate operator applications
  • The buttons feature raised dimples for easy, or vision-impaired identification
  • A visor clip is included
  • Multi-Code format with two 10-position coding switches
  • 1,024 possible codes for each channel
  • Codes: 1,024 (set by dip switches)
  • Independent coding supports activation of a common gate and a private door
  • The transmitter will only activate receivers set with the same code
  • Compatible with 300 MHz Multi-Code receivers
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • RF frequency: 300 MHz
  • Dimensions: 2.5" W x 3.75" H x 0.875" D

Multicode 414001

  • Four-channel visor transmitter
  • Each button can be programmed to a different location
  • Portable transmitter designed for automatic door and gate operator applications
  • The buttons feature raised dimples for easy, or vision-impaired identification
  • A visor clip is included
  • The transmitter is Multi-Code format with two 10-position coding switches providing 512 possible codes for each channel
  • Compatible with 300 MHz Multi-Code receivers
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 512 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
  • Dimensions: 2.5" W x 3.75" H x 0.875" D

Multicode Mini 306010

  • One-channel key ring transmitter
  • Miniature style transmitter designed for automatic door and gate operator applications.
  • The transmitter has a red test/operate indicator.
  • Compatible with 300 MHz Multi-Code receivers
  • Easy access to battery and coding switches
  • Power: 12-volt battery
  • Codes: 1,024 (set by dip switches)
  • RF frequency: 300 MHz
  • Dimensions: 1.5" W x 2.5" H x 0.625" D

Multicode Mini 308301

  • Two-channel key ring transmitter
  • Miniature style transmitter designed for automatic door and gate operator applications
  • The buttons feature raised dimples for easy, or vision-impaired identification
  • The transmitter has a red test/operate indicator
  • The transmitter is Multi-Code format with two 10-position coding switches providing 1,024 possible codes for each channel
  • Independent coding supports activation of a common gate and a private door
  • Easy access to battery and coding switches
  • Power: 12-volt battery
  • Codes: 1,024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
  • Dimensions: 1.5" W x 2.5" H x 0.625" D